Qingdao CO-NELE lntelligent Equipment Technology Co.,LTD

Improve unloading efficiency The large-sized unloading door can discharge materials faster and reduce unloading time, thereby improving production efficiency.

Control the mixing time If the mixing time is too short, the materials may not be fully mixed; if the mixing time is too long, the materials may be over-sheared, heated and dispersed, which also affects the homogeneity. Therefore, it is necessary to reasonably control the mixing time according to the characteristics of the materials and process requirements.

Appearance Check the appearance of the concrete mixer to see if it is neat, rust-free, deformed, crack-free, discolored and other defects. At the same time, check whether the shaft end, universal coupling, transmission system, lubrication system, electrical system and other components are complete, without looseness, missing, damage and other problems.

Cement: As the main cementing material of concrete, it solidifies and hardens after mixing with water.

Material properties Different materials have different physical properties, such as viscosity, specific gravity, rheological properties, etc. These factors will affect the mixing effect of the mixer. Therefore, it is necessary to select the appropriate mixer model and parameters according to the material characteristics.

Check the power supply to ensure that it meets the requirements. Start the mixing motor and observe whether the rotation direction of the mixing drum is consistent with the direction of the arrow on the mixing drum. If the direction is opposite, the power connection should be changed.