Qingdao CO-NELE lntelligent Equipment Technology Co.,LTD

Mixer design The type, shape, size and speed of the mixer will directly affect the mixing effect. Different types of mixers produce different shear, folding, squeezing and impact forces during the mixing process, which affects the mixing uniformity of the materials.

The flying knife device in the dry powder mixer is a patented device designed mainly to improve the homogeneity of mixing. Its working principle is as follows: when the material enters the mixing drum, the main shaft of the mixer will quickly break up the material. For those clumping materials that cannot be quickly broken up, the rotation of the mixing blades will bring them to the flying knife device, where they will be broken up by the flying knife. During the entire mixing process, the mixing main shaft and the flying knife device have clear division of labor and cooperate to achieve highly homogeneous mixing of materials.

The application of mixers in the hazardous waste industry is mainly reflected in the treatment of industrial hazardous waste and solid waste. These mixers have very large processing capacity and durability, and can quickly process hazardous waste and solid waste of various environmental protection standards and characteristics. The mixer achieves multi-level mixing of materials through rotation and revolution, so that the materials rotate in the cylinder. At the same time, the materials on the edge and wall of the cylinder are driven by the stirring device, and the side scraper and bottom scraper are used to achieve full mixing of the materials. This planetary operation mode makes the configuration more flexible, improves the mixing intensity, and realizes all-round mixing and stirring of materials.

Check the electrical system: Ensure that the electrical system of the equipment is correctly wired, including the wiring of the motor and control system, and whether the operating status of the electrical components is normal.

Prepare the raw materials: put loess, sand, water and other raw materials into the hopper as needed.

The production of different types of concrete requires adjustment of mixer parameters, such as mixing time, speed, water addition, etc. These parameters will affect the properties of concrete such as uniformity, fluidity and strength. For example, for fluid concrete, it is necessary to increase the amount of water added and mixing time to ensure that the concrete has good fluidity; while for high-strength concrete, it is necessary to reduce the amount of water added, increase the mixing time and speed to improve the strength and density of the concrete.