Qingdao CO-NELE lntelligent Equipment Technology Co.,LTD

Prevent material leakage When the mixer is running at high speed, if the shaft end seal is poor, it may cause material leakage, thus affecting the normal operation of the equipment and even affecting production.

Large internal space design The internal space design of the top motor concrete mixer is large, which is conducive to the fluidity of the material, speeds up the mixing speed, and improves the processing uniformity.

When operating a concrete mixer, you need to wear personal protective equipment suitable for the working environment, including safety helmets, goggles, protective gloves, protective shoes, etc.

Lubrication The reducer needs to be replaced after 50 hours of use. In future production, the reducer lubricant needs to be replaced every 1000 hours or half a year.

The oil is splashed onto the inner wall of the reduction box through the rotation of the gears and bearings of the mixer, and flows into the bearings for lubrication. The oil level of the gearbox should be kept between the two engraved lines of the oil dipstick. Too high or too low oil level will cause temperature rise or poor lubrication of various parts, increase power loss and cause poor operation of the machine.

Good mixing uniformity The phosphogypsum mixer can not only mix phosphogypsum, but also concrete or other materials. This diversified mixing function can improve the mixing uniformity of materials, enhance the quality of production, and promote the improvement of material efficiency.